Page of 213
Download Table of ContentsContents Print This PagePrint Bookmark

HP J3245A Installation And Configuration Manual: Complete The Network Connections To The Switch

Hewlett-packard advancestack switch installation and configuration guide.
Hide thumbs

Advertisement

5. Complete the Network Connections
Connect the switch to the power source. With the switch mounted, you are
now ready to connect it to your network. Typical switch connections are:
N o t e
Refer to the HP AdvanceStack Switch 800T Connectivity Quick Reference that
is shipped with the Switch 800T for examples of Switch 800T connections to
other devices.
For other network design guidelines, refer to An Introduction to Ethernet
LAN Switches and Designing Switched Networks, both of which are included
on the CD shipped with the Switch 800T. For physical topology guidelines,
refer to Designing HP AdvanceStack Workgroup Networks, available from
HP authorized LAN dealers and also on the CD shipped with your Switch 800T.
Network connections to the Switch 800T are through ports on the optional
transceivers installed in the switch.
Figure 1-16. Network Connections
to the Switch
Switch-to-networked devices (i.e. servers, and printers).
Switch-to-hub
Switch-to-switch
Switch-to-router

5. Complete the Network Connections to the Switch

Installation
1-19

Advertisement

   Related Manuals for HP HP J3245A

This manual also for:

Advancestack 800t

Comments to this Manuals

Symbols: 0
Latest comments: