Mounting The Switch On A Wall - HP J3245A Installation And Configuration Manual

Installation
3. Mount the Switch

Mounting the Switch on a Wall

C a u t i o n
The Switch 800T should be mounted only to a wall or wood surface that is
constructed of a minimum of 1/2-inch plywood or its equivalent.
1.
2.
Figure 1-12. Bracket Positions for Wall-Mount Options
1-14
Using a Phillips (cross-head) screwdriver, attach the mounting brackets
to the switch in one of the positions shown in the following two illustra-
tions. Use the 10-mm M4 screws included in the mounting kit.
Attach the switch to the wall or wood surface with 5/8-inch number 12
wood screws (not included).
Bracket Mounting
Position on a Wall
for Connectors
Facing Upward
10-mm M4
screws
Bracket
Mounting
Position on a Wall
for Connectors
Facing Outward
10-mm M4
screws
Plug the power
cord into the
switch's power
receptacle
before mounting
the switch. There
may not be
enough room to
do so after the
switch is
mounted.