Table of Contents
Advertisement
Figure 7-4. Example of Configuring a Port Trunk
4.
To assign another port to the trunk, repeat steps 3c, and 3d.
5.
When you are finished assigning ports to the trunk, press [Enter], then [S]
(for Save) to save the new port trunk configuration and return to the
Configuration menu.
6.
When you are finished configuring the switch, return to the Main Menu.
To Remove a Port from the Trunk: In step 3c, above, select the port you
want to remove from the trunk. In step 3d, continue pressing the Space bar
until the trunk assignment is blank.
Trunk Assignment
Advanced Concepts
Port Trunking
7-7
Advertisement
Table of Contents
Troubleshooting
