Overview Of Using Vlans - HP J3245A Installation And Configuration Manual

Advanced Concepts
Virtual LANs (VLANs)
Adding a Transceiver Module. If you install a transceiver module in a
previously unoccupied slot, the port for that transceiver module will be
automatically added to the default VLAN.
C a u t i o n
Before installing a transceiver module in the Switch 800T, you must first turn
off the power to the switch to avoid damaging switch components. Refer to
"1. Install Add-In Transceivers" on page 1-3.
Figure 7-9. Example of VLANs Spanning Multiple Switches

Overview of Using VLANs

To use VLANs, you will need to follow these general steps:
7-16
VLAN A
server
workstation
Switch 1
VLAN B
workstation
workstation
workstation
Configure at least one VLAN in addition to the default VLAN
(DEFAULT_VLAN). Refer to "How To Configure a VLAN" on the next
page.
Interswitch
Link for VLAN A
server
Switch 2
100 VG Hub
workstation
workstation
Interswitch Link
for VLAN B
workstation
workstation
server