Advanced Concepts
Spanning Tree Protocol (STP)
6.
7.
8.
9.
10. Press [S] to save the currently displayed STP parameter settings and return
11. When you are finished configuring the switch, return to the Main Menu.
7-4
If the remaining STP parameter settings are adequate for your network,
go to step 9.
Use [Tab] or the arrow keys to select the next parameter you want to
change, then type in the new value. (If you need information on STP
parameters, press [Enter] to select the Actions line, then press H to get
help.)
Repeat step 7 for each additional parameter you want to change.
When you are finished editing parameters, press [Enter] to return to the
Actions line.
to the Configuration menu.