Table of Contents
Advertisement
Table 9
Switch data window entries
Entry
First Port Address
World Wide Name
Serial Number
Reason for Status
User Name
Login Level
Super User
UserAuthentication Enabled
Vendor
Firmware Version
Inactive Firmware Version
Pending Firmware Version
PROM/Boot Version
MAC Address
IP Address
Subnet Mask
Gateway
SNMP Enabled
Negotiated Domain ID
Configured Domain ID
Domain ID Lock
Number of Ports
Operational State
Administrative State
Configured Admin State
R_A_TOV
E_D_TOV
Interop Mode
Legacy Address Format
Interop Auto Save
Description
Switch FC address
Switch World Wide Name
Number assigned to each chassis (required for PFE keys)
Additional status information
Account name
Authority level
Super user privileges enabled/disabled
Enforcement of account names and authority (always True)
Switch manufacturer
Active firmware version
Not applicable
Firmware version that will be activated at the next reset
PROM boot version
Media Access Control address
Internet Protocol address
Mask that determines the IP address subnet
Gateway address
SNMP enabled or disabled
The domain ID currently being used by the fabric
The domain ID defined by network administrator
Domain ID lock status. Prevents (True) or permits
(False—default) dynamic domain ID reassignment
Number of ports activated on the switch
Switch operational state: online, offline, diagnostic, down
Current switch administrative state
Switch administrative state that is stored in the switch
configuration
Resource allocation timeout value
Error detect timeout value
Interoperability mode. Use Standard to connect to FC-SW-2
compliant switches and McDATA switches in Open Fabric
Mode. Use McDATA Fabric Mode to connect to McDATA
switches in McDATA Fabric Mode. The default is Standard.
Not applicable
Zoning auto save status. Saves zoning updates in temporary
memory and the zoning database (True), or only in
temporary memory (False).
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide
69
Advertisement
Table of Contents
