Table of Contents
Advertisement
About this guide
This manual describes the McDATA
4Gb SAN Switch. The McDATA 4Gb SAN Switch is a 10-port non-blocking Fibre Channel (FC) switch.
This manual defines the features, components, and performance characteristics of the McDATA 4Gb SAN
Switch.
The embedded McDATA Web Server application is the primary focus of this manual which is organized as
follows:
• "Using McDATA Web
its displays.
• "Managing
• "Managing
• "Managing
• "Command Line
A glossary of terms and an index are also provided.
Intended audience
This manual introduces the switch management products and explains their installation and use. It is
intended for users responsible for installing and using switch management tools.
Prerequisites
Prerequisites for using this product include:
•
Knowledge of operation systems
•
Knowledge of related hardware/software
Related documentation
In addition to this guide, please refer to other documents for this product:
•
McDATA 4Gb SAN Switch for HP p-Class BladeSystem release notes AA-RW1ZA-TE
•
McDATA 4Gb SAN Switch for HP p-Class BladeSystem quick setup instructions A8001-90001
•
McDATA 4Gb SAN Switch for HP p-Class BladeSystem installation guide AA-RW1XA-TE
These and other HP documents can be found on the HP documents web site:
®
Web Server™ application switch management tool for the McDATA
Server" on page 13 describes how to use McDATA Web Server, its menus, and
fabrics" on page 25 describes fabric management tasks.
switches" on page 63 describes switch management tasks.
ports" on page 93 describes port management tasks.
Interface" on page 105 describes the Command Line Interface (CLI).
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide
http://www.hp.com/support/.
9
Advertisement
Table of Contents
