Table of Contents
Advertisement
Examples The following is an example of the CIMListener Create command:
McDATA4GbSAN (admin-cim) #> cimlistener create listener_1
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Name
Type
URL
Finished configuring attributes.
This configuration must be saved with the cim save command
before it can take effect, or to discard this configuration
use the cim cancel command.
See also
CIM
command, page 113
CIMSubscription
listener_1
(2=Permanent, 3=Transient)
(IP address:port format)
command, page 116
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 115
[Permanent
]
[10.0.0.1:5000]
Advertisement
Table of Contents
