HP AA-RW20A-TE User Manual page 119

Hewlett-packard 4-gb san switch user guide
Table of Contents

Advertisement

restore
Restores configuration settings to an out-of-band switch from a backup file named configdata,
which must be first uploaded on the switch using FTP. You create the backup file using the Config
Backup command. Use FTP to load the backup file on a switch, then enter the Config Restore
command. After the restore is complete, the switch automatically resets. Refer to
restoring switch
NOTE:
Setup System command to return the IP configuration to the values you want.
NOTE:
are not compatible with the Config Restore command.
save [config_name]
Saves changes made during a configuration edit session in the configuration given by
[config_name]. If you omit [config_name], the value for [config_name] you chose for the most
recent Config Edit command is used. [config_name] can be up to 31 characters excluding #,
semicolon (;), and comma (,). The switch supports up to 10 configurations including the default
configuration.
Notes If you edit the active configuration, changes will be held in suspense until you reactivate the
configuration or activate another configuration.
Examples The following shows an example of how to open and close a Config Edit session:
McDATA4GbSAN #> admin start
McDATA4GbSAN (admin) #> config edit
The config named default is being edited.
.
.
McDATA4GbSAN (admin-config) #> config cancel
Configuration mode will be canceled. Please confirm (y/n): [n] y
McDATA4GbSAN (admin) #> admin end
The following is an example of how to create a backup file (configdata) and download the file to
the workstation.
McDATA4GbSAN #> admin start
McDATA4GbSAN (admin) #> config backup
McDATA4GbSAN (admin) #> admin end
McDATA4GbSAN #> exit
#>ftp symbolic_name or ip_address
user: images
password: images
ftp> bin
ftp> get configdata
ftp> quit
configurations" on page 107.
All management sessions are terminated because the switch is reset. Use the Set
Configuration archive files created with the McDATA Web Server Archive function
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 119
"Backing up and

Advertisement

Table of Contents
loading

Table of Contents