Table of Contents
Advertisement
Table 50
Entry
SSLEnabled
EmbeddedGUIEnabled
SNMPEnabled
NTPEnabled
CIMEnabled
FTPEnabled
MgmtServerEnabled
172 Command Line Interface
Switch services settings (continued)
Description
Enables (True) or disables (False) secure SSL connections for
management applications including McDATA Web Server, the
McDATA Web Server web applet, McDATA Web Server Application
Programming Interface, and the CIM server. The default is False.
•
To enable secure SSL connections, you must first synchronize the
date and time on the switch and workstation.
•
This service must be enabled to authenticate users through a
RADIUS server.
•
Enabling SSL automatically creates a security certificate on the
switch.
•
To disable SSL when using a user authentication RADIUS server,
the RADIUS server authentication order must be local.
Enables (True) or disables (False) the McDATA Web Server web
applet. The web applet enables you to point at a switch with an
internet browser and run McDATA Web Server through the browser.
This parameter is the master control for the Set Setup System command
parameter, EmbeddedGUIEnabled. The default is True.
Enables (True) or disables (False) the management of the switch
through third-party applications that use the Simple Network
Management Protocol (SNMP). This parameter is the master control
for the Set Setup SNMP command parameter, SNMPEnabled. The
default is True.
Enables (True) or disables (False) the Network Time Protocol (NTP)
which allows the synchronizing of switch and workstation dates and
times with an NTP server. This helps to prevent invalid SSL certificates
and timestamp confusion in the event log. The default is False. This
parameter is the master control for the Set Setup System command
parameter, NTPClientEnabled. The default is False.
Enables (True) or disables (False) the management of the switch
through third-party applications that use the Common Information
Model (CIM). The default is True.
Enables (True) or disables (False) the File Transfer Protocol (FTP) for
transferring files rapidly between the workstation and the switch. The
default is True.
Enables (True) or disables (False) the management of the switch
through third-party applications that use GS-3 Management Server
(MS). This parameter is the master control for the Set Config Port
command parameter, MSEnable. The default is False.
Advertisement
Table of Contents
