Table of Contents
Advertisement
The following is an example of the Set Config Switch command:
McDATA4GbSAN #> admin start
McDATA4GbSAN (admin) #> config edit
McDATA4GbSAN (admin-config) #> set config switch
A list of attributes with formatting and default values will follow.
Enter a new value or simply press the ENTER key to accept current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
AdminState
BroadcastEnabled
InbandEnabled
FDMIEnabled
FDMIEntries
DefaultDomainID
DomainIDLock
SymbolicName
R_A_TOV
E_D_TOV
PrincipalPriority
ConfigDescription
InteropMode
(1=Online, 2=Offline, 3=Diagnostics)
(True / False)
(True / False)
(True / False)
(decimal value, 0-1000)
(decimal value, 97-127)
(True / False)
(string, max=32 chars)
(decimal value, 100-100000 msec)
(decimal value, 10-20000 msec)
(decimal value, 1-255)
(string, max=64 chars)
(0=Standard, 1=McData Fabric Mode)
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 163
[Online
]
[True
]
[True
]
[True
]
[1000
]
[2
]
[False
]
[4Gb SAN Switch]
[10000
]
[2000
]
[254
]
[Default Config]
[Standard
]
Advertisement
Table of Contents
