Table of Contents
Advertisement
• Show (About, Alarm, Backtrace, Chassis, Config Port, Config Security, Config Switch, Config
Threshold, Dev, Dev Settings, Domains, Fabric, Log, Log Archive, Log Settings, Lsdb, Mem,
Ns, Perf, Port, Setup Mfg, Setup Snmp, Setup System, Steering, Switch, Topology, Users)
• Uptime
• User Accounts
• Whoami
• Zoneset (Active, List)
• Zoning (History, Limits, List)
switch
Displays switch operational information.
Table 54
Parameter
SymbolicName
SwitchWWN
SwitchType
BootVersion
CreditPool
DomainID
FirstPortAddress
FlashSize - MBytes
LogLevel
MaxPorts
NumberOfResets
ReasonForLastReset
ActiveImageVersion —
build date
PendingImageVersion —
build date
ActiveConfiguration
AdminState
AdminModeActive
BeaconOnStatus
OperationalState
PrincipalSwitchRole
BoardTemp (1) —
Degrees Celsius
SwitchDiagnosticsStatus
SwitchTemperatureStatus
182 Command Line Interface
Switch operational parameters
Description
Descriptive name for the switch
Switch World Wide Name
Switch model
PROM boot version
Number of port buffer credits available to recipient ports
Switch domain ID
FC address of switch port 0
Size of the flash memory in megabytes
Event severity level used to record events in the event log
Number of ports available on the switch
Number of times the switch has been reset over its service life
Action that caused the last reset
Active firmware image version and build date
Firmware image version and build date that is pending. This image will
become active at the next reset or power cycle.
Name of the switch configuration that is in use
Switch administrative state
Admin session status
Beacon status as set by the Set Beacon command
Switch operational state
Principal switch status. True indicates that this switch is the principal
switch.
Internal switch temperature at circuit board sensor 1
Results of the POST
Switch temperature status: normal, warning, failure
Table 54
describes the switch operational parameters.
Advertisement
Table of Contents
