Table of Contents
Advertisement
The following is an example of the Group Edit command:
McDATA4GbSAN (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end of
the list
Group Name
Group Type
Group Member
Authentication
PrimaryHash
PrimarySecret
SecondaryHash
SecondarySecret
Binding
Finished configuring attributes.
To discard this configuration use the security cancel command.
The following is an example of the Group List command:
McDATA4GbSAN #> group list
Group
-----
group1 (ISL)
group2 (Port)
The following is an example of the Group Members command:
McDATA4GbSAN #> group members group1
Current list of members for Group: group1
----------------------------------
10:00:00:c0:dd:00:71:ed
10:00:00:c0:dd:00:72:45
10:00:00:c0:dd:00:90:ef
10:00:00:c0:dd:00:b8:b7
See also
Security
command, page 149
Securityset
command, page 152
Set Config
command, page 156.
press 'q' or 'Q' and the ENTER key to do so.
g1
ISL
10:00:00:c0:dd:00:90:a3
(None / Chap)
(MD5 / SHA-1)
(40 hex or 20 ASCII char value) [
(MD5 / SHA-1 / None)
(32 hex or 16 ASCII char value) [
(domain ID 97-127, 0=None)
SecuritySet
-----------
alpha
alpha
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 131
[None]
chap
[MD5 ]
sha-1
]
1234567890123456789
[None]
md5
]
1234567890123456
[3
]
Advertisement
Table of Contents
