Table of Contents
Advertisement
Config command
Description Manages the FC configurations on a switch. For information about setting the port and switch
configurations, refer to the Set Config command.
Authority Admin session for all operands except List.
Syntax
config
activate [config_name]
backup
cancel
copy [config_source] [config_destination]
delete [config_name]
edit [config_name]
list
restore
save [config_name]
Operands
activate [config_name]
Activates the configuration given by [config_name]. If you omit [config_name], the currently
active configuration is used. Only one configuration can be active at a time.
backup
Creates a file named configdata, which contains the system configuration information. To
download this file, open an FTP session, log in with account name/password of "images" for
both, and enter "get configdata". Refer to
page 107.
cancel
Terminates the current configuration edit session without saving changes that were made.
copy [config_source] [config_destination]
Copies the configuration given by [config_source] to the configuration given by
[config_destination]. The switch supports up to 10 configurations including the default
configuration.
delete [config_name]
Deletes the configuration given by [config_name] from the switch. You cannot delete the default
configuration (Default Config) nor the active configuration.
edit [config_name]
Begins an edit session for the configuration given by [config_name]. If you omit [config_name],
the currently active configuration is used.
list
Displays a list of all available configurations on the switch. This operand does not require an
Admin session.
118 Command Line Interface
"Backing up and restoring switch
configurations" on
Advertisement
Table of Contents
