Table of Contents
Advertisement
CIMListener command
Description Configures CIM indication service listeners and adds subscriptions to listeners. Refer to the
CIMSubscription command for information about configuring subscriptions.
Authority Admin session and a CIM Edit session. Refer to the CIM command for information about opening a
CIM edit session.
Syntax
cimlistener
add [listener_name] [subscription_list]
create [listener_name]
delete [listener_name]
edit [listener_name]
Operands
add [listener_name] [subscription_list]
Adds the set of subscriptions given by [subscription_list] to the listener given by [listener_name].
Use a <space> to delimit subscription names in [subscription_list].
create [listener_name]
Prompts you in a line-by-line fashion to create a CIM listener with the name given by
[listener_name]. [listener_name] can have up to 32 characters: 0—9, A—Z, a—z, _, $, ^, and -.
The CIM listener configuration parameters are described in
Table 29
Parameter
Name
Type
URL
delete [listener_name]
Deletes the listener given by [listener_name] from the CIM database.
edit [listener_name]
Opens an editing session in which you can modify the CIM listener given by [listener_name].
Refer to
114 Command Line Interface
CIM listener configuration parameters
Description
Listener name
Listener type:
•
Permanent —
connection can be established or not. This is the default.
•
Transient — sends indications to
connection cannot be established after 60 minutes.
IP address of the CIM client and the port number to which to send indications.
The default is 10.0.0.1:5000.
Table 29
for a description of the CIM listener configuration parameters.
Table
send indications to the CIM client whether a
the CIM client, but ceases if a
29.
Advertisement
Table of Contents
