Table of Contents
Advertisement
threshold
Initiates a configuration session by which to generate and log alarms for selected events. The
system displays each event, its triggers, and sampling window one line at a time and prompts
you for a value. For each parameter, enter a new value or press Enter to accept the current value
shown in brackets. These parameters must be saved in a configuration and activated before they
will take effect. Refer to the Config command for information about saving and activating a
configuration.
port if an alarm condition is not cleared within three consecutive sampling windows (by default
30 seconds). Reset the port to bring it back online. An alarm is cleared when the threshold
monitoring detects that the error rate has fallen below the falling trigger.
Table 47
Parameter
Threshold Monitoring Enabled
CRCErrorsMonitoringEnabled
DecodeErrorsMonitoringEnabled
ISLMonitoringEnabled
LoginMonitoringEnabled
LogoutMonitoringEnabled
LOSMonitoringEnabled
Rising Trigger
Falling Trigger
Sample Window
160 Command Line Interface
Table 47
describes the Set Config Threshold parameters. The switch will down a
Set Config threshold parameters
Description
Master enable/disable parameter for all events. Enables (True)
or disables (False) the generation of all enabled event alarms.
The default is False.
The event type enable/disable parameter. Enables (True) or
disables (False) the generation of alarms for each of the
following events:
•
CRC errors
•
Decode errors
•
ISL connection count
•
Device login errors
•
Device logout errors
•
Loss-of-signal errors
The event count above which a rising trigger alarm is logged.
The switch will not generate another rising trigger alarm for
that event until the count descends below the falling trigger
and again exceeds the rising trigger.
The event count below which a falling trigger alarm is logged.
The switch will not generate another falling trigger alarm for
that event until the count exceeds the rising trigger and
descends again below the falling trigger.
The period of time in seconds in which to count events
Advertisement
Table of Contents
