Security Command - HP AA-RW20A-TE User Manual

Security command

Description Opens a Security Edit session in which to manage the security database on a switch. Refer to the
Group command and the Securityset command.
IMPORTANT:
Authority Admin session. The operands Active, History, Limits, and List are available without an Admin session.
Syntax
security
active
cancel
clear
edit
history
limits
list
restore
save
Operands
active
Displays the active security set, its groups, and group members. This operand does not require an
Admin session.
cancel
Ends a Security Edit session without saving changes. Use the Edit operand to open a Security Edit
session.
clear
Clears all inactive security sets from the volatile edit copy of the security database. This operand
does not affect the non-volatile security database. However, if you enter the Security Clear
command followed by the Security Save command, the non-volatile security database will be
cleared from the switch.
edit
Initiates a Security Edit session in which to make changes to the security database. A Security Edit
session enables you to use the Group and Securityset commands to create, add, and delete
security sets, groups, and group members. To end a Security Edit session and save changes,
enter the Security Save command. To end a Security Edit session without saving changes, enter
the Security Cancel command.
history
Displays history information about the security database and the active security set including the
account name that made changes and when those changes were made. This operand does not
require an Admin session.
limits
Displays the current totals and the security database limits for the number of security sets, groups,
members per group, and total members. This operand does not require an Admin session.
list
Displays all security sets, groups, and group members in the security database. This operand
does not require an Admin session.
restore
Reverts the changes to the security database that have been made during the current Security Edit
session since the last Security Save command was entered.
This command is available only with the SANtegrity Enhanced PFE key.
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 149