Table of Contents
Advertisement
CIMSubscription command
Description Creates, edits, or removes CIM subscriptions.
Authority Admin session and a CIM Edit session.
Syntax
cimsubscription
create [subscription_name]
delete [subscription_name]
edit [subscription_name]
Operands
create [subscription_name]
Prompts you in a line-by-line fashion to create a CIM subscription with the name given by
[subscription_name]. [subscription_name] can have up to 32 characters: 0—9, A—Z, a—z, _, $,
^, and -.
Table 30
Parameter
Name
FilterID
EnabledState
Duration
delete [subscription_name]
Deletes the subscription given by [subscription_name] from the CIM database.
edit [subscription_name]
Opens an editing session in which you can modify the CIM subscription given by
[subscription_name]. Refer to
parameters.
116 Command Line Interface
Table 30
describes the CIM subscription configuration parameters.
CIM Subscription configuration parameters
Description
Subscription name
Event type for which the switch monitors and sends an indication to the CIM
client. The event types are as follows:
CreateComputerSystem — a switch is added to the fabric. This is the
default.
ModifyComputerSystem — a switch state change
DeleteComputerSystem — a switch is removed from the fabric
CreateFCPort — not supported
ModifyFCPort — an FC port state change
DeleteFCPort — not supported
Enable (True) or disable (False) the subscription. The default is True.
Subscription life span in seconds. The subscription life span begins when
the subscription is created. Expired subscriptions do not send indications to
the CIM client though they remain in the CIM database. Values can be
1–720000. 0 indicates indefinite, which is the default.
Table 30
for a description of the CIM subscription configuration
Advertisement
Table of Contents
