Table of Contents
Advertisement
Button Labels
Page 130
of the guide, write button information in each button area as desired, and put them in the
SMX input or output buttons windows. Labels can be created using the Extron
Button-Label Generator software.
Using the Button Label Generator
The Button Label Generator software creates labels that you can place inside the translucent
covers of the input and output push buttons (see
for procedures for removing the replacing the translucent covers). You can create labels
with names, alphanumeric characters, icons, and even colored bitmaps for easy and intuitive
input and output selection.
The program is contained on the same DVD as the SMX Control Program and is installed
automatically when you install the control software.
By default, the software files are placed in the
ButtonLabelGenerator
"Extron Electronics" group or folder.
1.
2.
3.
provides strips of blank button labels. If desired, photocopy them or cut them out
directory. The
To run the Button Label Generator program, double-click on the
Label Generator
icon (shown at right) in the Extron Electronics group or
folder. The Button Label Generator window appears (see
Figure 72.
Button Label Generator Window
From the
drop-down list, select a system button configuration.
Systems
The
Matrix Switchers 3232
configuration of the SMX (the SMX option gives you four rows of blank buttons).
However, you can select any option from this menu. Selecting
Layouts
opens a blank worksheet on which customized buttons can be placed in any
desired configuration.
Click on the button representation that you want to edit. A red box surrounds the
selected button.
SMX System MultiMatrix Switcher • Reference Information
Replacing Button Labels
C:\Program Files\Extron\
Button Label Generator
figure
or
1616
selections most closely match the button
on page 128
icon is placed in the
Button
72).
Customize Button
127
Advertisement
Table of Contents
