Button.labels; Qs-Fpc Front Panel Operations - Extron electronics CrossPoint 450 Plus Series User Manual

Button labels
The numbered translucent covers on the input and output buttons can be removed
and replaced to insert labels behind them.
Input and output labels can be created easily with the Extron Button Label
Generator software, which is shipped with every Extron matrix switcher. Each
input and output can be labeled with a name, alphanumeric characters, or a color
bitmap for easy and intuitive input and output selection (figure 3-3). See chapter 5,
"Matrix Software", for details on using the labeling software. See appendix B,
"Reference Information", for blank labels and a procedure for removing and
replacing the translucent covers.
10
VCR
Document
DVD
Camera
Figure 3-3 — Sample button labels and icons

QS-FPC Front Panel Operations

The following paragraphs detail the power-up process and then provide sample
procedures for the following actions:
• Creating ties, sets of ties, and configurations
• Changing a configuration
• Viewing ties, sets of ties, and configurations
• Creating I/O groups
• Setting RGB Delay
• Saving and recalling presets
• Muting and unmuting outputs
• Viewing and adjusting the input audio level
• Viewing and adjusting the output volume
• Locking the front panel
• Performing front panel resets
• Setting background illumination
• Reading and setting the RS-232/RS-422 port settings
13
Computer Computer
28 29 30 31 32
CrossPoint 450 Plus and MAV Plus Switchers • Operation
I
N
15
P
U
VTG 200
T
S
3-11