Table of Contents
Advertisement
4.
Press the <Enter> key. The SMX checks to see if it is password-protected.
If the SMX is not password-protected, the System Status web page is displayed.
If the SMX is password-protected, the network password dialog box is displayed
figure
45).
(see
5.
In the
field, enter the appropriate administrator or user password. If desired,
Password
select the check box to have the system input the password the next time you enter your
SMX IP address. Click
OK
Figure 45.
Example of a Network Password Dialog Box
NOTE:
A
User Name
viewable only when logged in as a User.
The SMX checks several possibilities, in the following order, and responds accordingly:
Does the address include a specific file name, such as
•
? If so, the SMX downloads that HTML page.
name.html
Is there a file in the SMX memory that is named "index.html?" If so, the SMX
•
downloads "index.html" as the default startup page.
If neither of the above conditions is true, the SMX downloads the factory-installed
•
default startup page, "nortxe_index.html" (System Status page, see
Any of the four main pages (System Status, Configuration, File Management, and Control)
can be accessed at any time by clicking on the relevant tab. Each main page has a series of
sub-pages, accessible through the named links in the sidebar menu.
Figure 46.
System Status Page Set to the Default Home Page
SMX System MultiMatrix Switcher • HTML Configuration and Control
.
entry is not required. Some web pages may not be available or
192.168.254.254/file_
figure
46).
88
Advertisement
Table of Contents
