Mounting Instructions; Removing And Installing Button Labels; Making Labels Using The Button Label Generator Program - Extron electronics DTP CrossPoint 4K Series User Manual

Mounting Instructions

If desired, rack mount the switcher as follows:
1.
2.

Removing and Installing Button Labels

Making labels Using the Button Label Generator Program

The Button Label Generator software creates labels that you can place in the translucent
covers of the input and output selection buttons. You can create labels with names,
alphanumeric characters, or even color bitmaps for easy and intuitive input and output
selection (see
removing and replacing the translucent covers).
Installing the Button Label Generator software
The Extron Button Label Generator is available on the Extron website under the
tab (see figure 91,
the program on your PC, using the procedure detailed in
page 86.
Figure 91.
By default, the installation creates a
folder and places the Button Label Generator icon into a group or folder named "Extron
Electronics."
NOTE:
Insert the unit into the rack, aligning the mounting bracket holes with those in the rack
(see figure 90).
Figure 90. Installing the Switcher in a Rack
Secure the switcher to the rack using the supplied bolts.
Installing Labels in the Buttons
). Click the
1
Location of Software on the Website
\
C: Program Files(x86)\
DTP CrossPoint 4K Series Matrix Switchers • Reference Information
on page 173 for the procedure for
link ( ), and locate and download and install
2
Software
Installing the Software
C:\Program Files\Extron\ButtonLabelGenerator
... for 64-bit Windows OS.
Download
on
171