Extron electronics SMX System User Manual page 71

Assign Device Icons — Select this option to add specific device icons to the main
•
window input and output boxes. This opens a new window showing input and output
device icons. Drag and drop an icon onto the applicable input or output boxes.
NOTE:
Alternatively, clicking on either input or output boxes opens the relevant
icon window. Drag and drop an icon onto the boxes.
• Edit Device Palette — Selecting this option opens the Editor window (see
To edit an icon name, swap, or upload a new icon, select the icon number, click
and follow the on-screen prompts. Any changes made are shown in the Device Palette
when next selected (see
Click to exit the Device Palette Editor window.
Close
Figure 34.
Device Palette Editing Windows
• RGB Delay (VGA and RGBHV boards only) — Select
this option to change and set RGB Delay for any selected
outputs. The RGB Delay and Mute Adjust window opens.
NOTE:
To select all outputs, check the
To change or set RGB delay:
1.
Select an output (or
slider to set the desired delay (in 0.5-second steps).
2. Click to accept the change, or click
Take
3.
Click to exit the window.
Close
NOTE: This menu also contains Mute Output settings (see
on page 66 for the procedure).
Customizing the SMX Window
ALL box.
) and adjust the RGB Delay
All
Cancel
SMX System MultiMatrix Switcher • SMX Control Software
figure
Edit
on page 75).
to ignore the change.
Mute Output settings
34).
65