Managing Ties - Extron electronics SMX System User Manual

4.
When you are finished assigning icons, click
To change an icon in an input or output box, drag the new icon to the box. The previous
icon is replaced.
To remove the icon and leave the box empty, drag an empty square from the Devices
window to the box.
Alternatively, you can display the input and output numbers in the boxes. To do this, select
Numbers in I/O Boxes

Managing Ties

The SMX Control window can create, remove, and view input-to-output ties.
To create a tie
• Click and drag an input box outline over to an output box.
• If
Hold/Verify Changes
connecting the two boxes appears, indicating a pending tie.
NOTE:
Click Take
Figure 38.
• If
Immediate Changes
immediately, a solid line appears, and the
from the
Preferences
has been selected in the
If you want to undo the pending tie, click
disappears.
to confirm the tie. The broken line becomes solid.
Completed Ties (Solid) and Pending Ties (Broken Lines)
has been selected from the
SMX System MultiMatrix Switcher • SMX Control Software
OK to close the device window.
menu.
menu, a broken line
Preferences
. The broken line
Cancel
menu, the tie is made
Preferences
Cancel and Take buttons are not displayed.
76