Installation Procedures; Connecting The Power Cord; Figure 2.3:Connecting The Power Cord - Advantech POC-S175 User Manual

2.2 Installation Procedures

2.2.1 Connecting the power cord

The POC-S175 could only be powered by a DC power adapter (XPiQ
Model no.PCM80PS24). Be sure to always handle the power cords by
holding the plug ends only.
Follow these procedures in order:
1. Connect the female end of the power adapter to the DC jack of the
panel PC. (See Figure 2-3.)
2. Connect the female end of the power cord to the DC power adapter
3. Connect the 3-pin male plug of the power cord to an electrical outlet.
3. After finish all above installation, please jump to section 2.2.2 and con-
tinue your installation procedure
POC-S175 User Manual
Figure 2.3: Connecting the power cord
10