No Read - Honeywell Voyager 1200g User Manual

When the output sequence is Off , the bar code data is output to the host as
the scanner decodes it. Default = Off.
Required

No Read

With No Read turned On, the scanner notifies you if a code cannot be read. If
using an EZConfig-Scanning Tool Scan Data Window (see page 9-2), an "NR"
appears when a code cannot be read. If No Read is turned Off, the "NR" will
not appear. Default = Off.
On
If you want a different notation than "NR," for example, "Error," or "Bad Code,"
you can edit the output message (see
The hex code for the No Read symbol is 9C.
4 - 22
*Off
Data Formatting
On/Not Required
* Off
beginning on page 6-1).