Terminal Id Table; Data Format Editor Commands - Honeywell Voyager 1200g User Manual

Terminal ID Table

Terminal
IBM
RS232
RS485
USB

Data Format Editor Commands

Send Commands
Send all characters
F1 Include in the output message all of the characters from the input
message, starting from current cursor position, followed by an insert
character. Syntax = F1xx where xx stands for the insert character's hex
value for its ASCII code.
Refer to the
for decimal, hex and character codes.
Send a number of characters
F2 Include in the output message a number of characters followed by an
insert character. Start from the current cursor position and continue for
"nn" characters or through the last character in the input message,
followed by character "xx." Syntax = F2nnxx where nn stands for the
numeric value (00-99) for the number of characters, and xx stands for
the insert character's hex value for its ASCII code.
Refer to the
for decimal, hex and character codes.
6 - 4
Model(s)
PC/AT and compatibles
PS2 Keyboard
USB SurePOS Handheld
Scanner
USB SurePOS Tabletop
Scanner
True
TTL
Serial
PC Keyboard
Mac Keyboard
Japanese Keyboard (PC)
HID POS
ASCII Conversion Chart (Code Page 1252)
ASCII Conversion Chart (Code Page 1252)
Terminal
ID
003
002
128
129
000
000
051
130
124
125
134
131
on page A-4
on page A-4