Verifone ® Ruby Terminal Default Settings; Gilbarco ® Terminal Default Settings - Honeywell Voyager 1200g User Manual

®
Verifone Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Verifone
Ruby terminal. This bar code sets the baud rate to 1200 bps and the data for-
mat to 8 data bits, Mark parity, 1 stop bit and RTS/CTS no timeout. It also adds
a line feed (LF) suffix and programs the following prefixes for each symbology:
Note: If you are having unexpected results with this programming code, scan
the Activate Defaults
programming code above.
®
Gilbarco
Scan the following Plug and Play code to program the scanner for a Gilbarco
terminal. This bar code sets the baud rate to 2400 bps and the data format to 7
data bits, even parity, 2 stop bits. It also adds a carriage return (CR) suffix and
programs the following prefixes for each symbology:
Note: If you are having unexpected results with this programming code, scan
the Activate Defaults
programming code above.
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Verifone Ruby Settings
bar code on page 1-9 first, then scan the
Terminal Default Settings
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Gilbarco Settings
bar code on page 1-9 first, then scan the
Prefix
A
A
FF
F
Prefix
A
E0
FF
F
2 - 9