Honeywell Voyager 1200g User Manual page 162

Step 1. Scan the 1st Left Identifier bar code, below.
Step 2. Use the
Step 3. Scan Save.
Step 4. Scan the 2nd Left Identifier bar code, below.
Step 5. Use the
Step 6. Scan Save.
Step 7. Scan the 1st Right Identifier bar code, below.
Step 8. Use the
Step 9. Scan Save.
Step 10. Scan the 2nd Right Identifier bar code, below.
Step 11. Use the
Step 12. Scan Save.
Once you have programmed the concatenation sequence, use
User-Defined Concatenation Sequences
0.
1st Left Identifier
1st Right Identifier
ISBT 128 User-Defined Concatenation Sequences
On/Off
The following selections allow you to enable or require the User-Defined
ISBT 128 Concatenation Sequences.
If you scan Off, the User-Defined concatenation sequences are disabled.
If you scan the Allow User-Defined Sequence code, then the scanner will
output only the data combination specified in the User-Defined concatena-
tion sequence you created.
7 - 28
Programming Chart
Programming Chart
Programming Chart
Programming Chart
to scan 3, D (hex for "=").
to scan 4, 7 (hex for "G").
to scan 3, D (hex for "=").
to scan 3, C (hex for "<").
to enable this feature. Default =
2nd Left Identifier
2nd Right Identifier
ISBT 128