Using The Scanner With Bluetooth Devices; Changing The Scanner's Bluetooth Pin Code; Minimizing Bluetooth/Ism Band Network Activity - Honeywell Voyager 1200g User Manual

Single-line laser bar code scanner
Hide thumbs Also See for Voyager 1200g:
Table of Contents

Advertisement

Using the Scanner with Bluetooth Devices

The scanner can be used either with the CCB00-010BT charge base or with
other Bluetooth devices. Those devices include personal computers and lap-
tops.
Scanning the following Non-Base BT Connection bar code allows the scanner
to be used with other Bluetooth devices (e.g., PC/laptop). After you scan the
Non-Base BT Connection bar code, follow the instructions supplied with your
Bluetooth device to locate the scanner and connect to it.
Note: If you go out of range with your scanner, the scanner will not reconnect to
the Bluetooth device when it is back in range.
To relink to the charge base, scan the Base BT Connection bar code.
Non-Base BT Connection

Changing the Scanner's Bluetooth PIN Code

Some devices require a PIN code as part of the Bluetooth security fea-
tures. Your scanner's default PIN is 0000, which you may need to enter the
first time you connect to your non-base Bluetooth device. To change the
PIN, scan the following bar code and then scan the appropriate numeric
bar codes from the
ual. (The PIN code must be between 1 and 16 characters.) Scan Save to
save your selection. Default = 0000.

Minimizing Bluetooth/ISM Band Network Activity

The following settings can help you customize the relinking behavior of the
cordless system to obtain the best compromise between convenience and low
interference.
Note: ISM band refers to the 2.4 to 2.48 GHz frequency band used by wireless
networks, cordless phones, and Bluetooth.
3 - 22
Programming Chart
Bluetooth PIN
Base BT Connection
inside the back cover of this man-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Voyager 1202g

Table of Contents