Reread Delay; User-Specified Reread Delay; Output Sequence Overview; Require Output Sequence - Honeywell Voyager 1200g User Manual

Reread Delay

This sets the time period before the scanner can read the same bar code a sec-
ond time. Setting a reread delay protects against accidental rereads of the
same bar code. Longer delays are effective in minimizing accidental rereads.
Use shorter delays in applications where repetitive bar code scanning is
required. Default = Medium.
Short (500 ms)
Long (1000 ms)

User-Specified Reread Delay

If you want to set your own length for the reread delay, scan the following bar
code, then set the delay (from 0-30,000 milliseconds) by scanning digits from
the Programming

Output Sequence Overview

Require Output Sequence

When turned off, the bar code data will be output to the host as the scanner
decodes it. When turned on, all output data must conform to an edited
sequence or the scanner will not transmit the output data to the host
device. See
tion.
Chart, then scanning Save.
User-Specified Reread Delay
Require Output Sequence
* Medium (750 ms)
Extra Long (2000 ms)
on page 4-21 for further informa-
4 - 17