Beeper Pitch - Good Read; Beeper - Transmit Order; Beeper Pitch - Error - Honeywell Voyager 1200g User Manual

Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the scan-
ner emits on a good read. Default = Medium.
Low (1600 Hz)
High (4200 Hz)

Beeper - Transmit Order

The beeper transmit order determines when the good read beep occurs.
The scanner can be set to emit the good read beep either before or after
data transmission. Default = Before Transmission.
* Before Transmission
Beeper Pitch – Error
The beeper pitch codes modify the pitch (frequency) of the sound the scan-
ner emits when there is a bad read or error. Default = Razz.
* Razz (100 Hz)
High (4200 Hz)
* Medium (2350 Hz)
After Transmission
Medium (2000 Hz)
4 - 3