LED Brightness
Default = Red High, Green High.
Red Off
Red Low
Red Medium
* Red High
In-Stand and Out-Of-Stand Settings
The following settings program the scanner's behavior when it is either in the
stand, or out of the stand (hand-held).
Caution: When working with In-Stand and Out-of-Stand settings, enable
the settings you want before disabling those you do not want to
use. If you disable settings first, you may program the scanner
so it is unable to read bar codes. if this happens, power cycle
the scanner and scan the defaults bar code on
4 - 8
Green Off
Green Low
Green Medium
* Green High
page
1-9.