Honeywell Voyager 1200g User Manual page 19

Scanner-Bioptic Packet Mode ............................. 2-28
ACK/NAK............................................................. 2-28
Communication Timeout ..................................... 2-28
Chapter 3 - Cordless System Operation
How the Charge and Communications Base Works ... 3-1
Linking the Scanner to a Base .................................... 3-1
Communication Between the Cordless System
and the Host.............................................................. 3-2
RF (Radio Frequency) Module Operation ................... 3-2
System Conditions ...................................................... 3-3
Linking Process ..................................................... 3-3
Scanner Is Out of Range....................................... 3-3
Scanner Is Moved Back Into Range...................... 3-3
Out of Range and Back into Range
Page Button ................................................................ 3-3
About the Battery ........................................................ 3-4
Voyager 1202g Battery Removal ................................ 3-4
Charging Information............................................. 3-4
Battery Recommendations .................................... 3-5
Proper Disposal of the Battery .............................. 3-6
Flash Updates ............................................................. 3-6
Beeper and LED Sequences and Meaning ................. 3-6
Scanner LED Sequences and Meaning ................ 3-6
Base LED Sequences and Meaning ..................... 3-7
Base Power Communication Indicator .................. 3-7
Reset Scanner ............................................................ 3-8
Scanning While in Base Cradle................................... 3-8
Paging ......................................................................... 3-8
Paging Mode ......................................................... 3-8
Paging Pitch ......................................................... 3-9
Error Indicators............................................................ 3-9
Scanner Address......................................................... 3-9
Base Address ............................................................ 3-10
Scanner Modes ......................................................... 3-10
with Batch Mode On......................................... 3-3
iii