Manual Activation Mode; End Manual Activation After Good Read - Honeywell Voyager 1200g User Manual

Manual Activation Mode

In Manual Activation Mode, you must press the button to scan a bar code.
The scanner scans until a bar code is read, or until the button is released.
Default = Manual Activation Mode On In-Stand, Manual Activation On Out-
of-Stand.
Manual Activation Mode Off
In-Stand
Manual Activation Mode Off
Out-of-Stand

End Manual Activation After Good Read

After a bar code is successfully read, the laser can be programmed either
to remain on and scanning, or to turn off. When End Manual Activation
After Good Read is enabled, the laser turns off and stops scanning after a
good read. If you scan Do Not End Manual Activation After Good Read,
the laser remains on after a good read, but the button must be pressed to
scan the next bar code. Default = End Manual Activation After Good Read.
Do Not End Manual Activation
After Good Read In-Stand
Do Not End Manual Activation
After Good Read Out-of-Stand
4 - 10
* Manual Activation Mode On
In-Stand
* Manual Activation Mode On
Out-of-Stand
* End Manual Activation After
Good Read In-Stand
* End Manual Activation After
Good Read Out-of-Stand