Transmit Records Automatically; Transmit Records To Host - Honeywell Voyager 1200g User Manual

Transmit Records Automatically

If you are operating in Inventory Batch Mode (see
page 3-14), you can transmit all stored data to the host system when the
scanner is placed in the base. If you don't want the records transmitted
when the scanner is placed in the base, scan the Don't Transmit Records
Automatically bar code. Default = Don't Transmit Records Automatically.
* Don't Transmit Records
Automatically

Transmit Records to Host

If you are operating in Inventory Batch Mode (see
page 3-14), and your scanner is set to Don't Transmit Records Automat-
ically, you must scan the following bar code to transmit all stored records to
the host system.
Transmit Inventory Records
Inventory Batch Mode
Transmit Records Automatically
Inventory Batch Mode
on
on
3 - 19