Codegate; Object Detection Mode - Honeywell Voyager 1200g User Manual

CodeGate

When CodeGate is On, the button is used to allow decoded data to be
transmitted to the host system. The scanner remains on, scanning and
decoding bar codes, but the bar code data is not transmitted until the but-
ton is pressed. When CodeGate is Off, bar code data is transmitted when
it is decoded. Default = CodeGate Off in-Stand, CodeGate On Out-of-
Stand.
* CodeGate Off
In-Stand
CodeGate Off
Out-of-Stand

Object Detection Mode

Object Detection Mode uses an LED to detect when an object is in the
scanner's field of view. When an object is detected, the laser turns on and
the scanner attempts to scan the bar code. Default = Object Detection
Mode On In-Stand.
Object Detection Mode Off
In-Stand
* Object Detection Mode Off
Out-of-Stand
4 - 12
®
CodeGate On
In-Stand
* CodeGate On
Out-of-Stand
* Object Detection Mode On
In-Stand
Object Detection Mode On
Out-of-Stand