Code 11; Check Digits Required - Honeywell Voyager 1200g User Manual

Code 11

<Default All Code 11 Settings>
Code 11 On/Off
On
* Off

Check Digits Required

These options set whether 1 or 2 check digits are required with Code 11
bar codes. Auto Select Check Digits determines the number of check
digits based on the length of the bar code. If the bar code is 10 digits or
more, 2 check digits are required. If it is 9 digits or less, 1 check digit is
required. The check digit data is only transmitted if you program that fea-
on page 7-22). Default = Two Check Digits
ture (see Check Digit Validation
Required.
One Check Digit Required
* Two Check Digits Required
Auto Select Check Digits
Required
7 - 21