Interfunction Delay - Honeywell Voyager 1200g User Manual

Next, scan the Character to Trigger Delay bar code, then the 2-digit hex
value for the ASCII character that will trigger the delay
Chart (Code Page 1252)
Delay Length
To remove this delay, scan the Delay Length bar code, and set the number
of delays to 0. Scan the
inside the back cover of this manual.

Interfunction Delay

An interfunction delay of up to 5000 milliseconds (in 5ms increments) may
be placed between the transmission of each segment of the message
string. Scan the following Interfunction Delay bar code, then scan the
number of 5ms delays, and the
Chart inside the back cover of this manual.
To remove this delay, scan the Interfunction Delay bar code, then set the
number of delays to 0. Scan the
Chart inside the back cover of this manual.
5 - 8
on page A-4.
Save bar code using the
Save
Prefix Scanned Data
STX 1 HT
Interfunction Delays
Interfunction Delay
Character to Trigger Delay
bar code using the
Suffix
2 3 4 5 CR
Save bar code using the
ASCII Conversion
Programming Chart
Programming
LF
Programming