Pg Speed Control Card Terminals And Specifications; Pg-X2 - Omron VARISPEED F7 User Manual

PG Speed Control Card Terminals and Specifications

PG-B2
The terminal specifications for the PG-B2 are given in the following table.
Terminal No.
1
Power supply for pulse generator
2
3
Pulse input terminals phase A
TA1
4
5
Pulse input terminals phase B
6
1
Pulse monitor output terminals
phase A
2
TA2
3
Pulse monitor output terminals
phase B
4
TA3 (E) Shield connection terminal

PG-X2

The terminal specifications for the PG-X2 are given in the following table.
Terminal No.
1
2 Power supply for pulse generator
3
4 Pulse input terminal phase A (+)
5 Pulse input terminal phase A (–)
TA1
6 Pulse input terminal phase B (+)
7 Pulse input terminal phase B (–)
8 Pulse input terminal phase Z (+)
9 Pulse input terminal phase Z (–)
10 Common terminal inputs
1 Pulse monitor output terminal phase A (+)
2 Pulse monitor output terminal phase A (–)
3 Pulse monitor output terminal phase B (+)
TA2 4 Pulse monitor output terminal phase B (–)
5 Pulse monitor output terminal phase Z (+)
6 Pulse monitor output terminal phase Z (–)
7 Common terminal monitor outputs
TA3 (E) Shield connection terminal
* 5 VDC and 12 VDC cannot be used at the same time.
Table 2.13 PG-B2 Terminal Specifications
Contents
12 VDC (±5%), 200 mA max.
0 VDC (GND for power supply)
H: +8 to 12 V (max. input frequency: 50 kHz)
GND pulse input phase A
H: +8 to 12 V (max. input frequency: 50 kHz)
GND pulse input phase B
Open collector output, 24 VDC, 30 mA max.
Open collector output, 24 VDC, 30 mA max.
-
Table 2.14 PG-X2 Terminal Specifications
Contents
Specifications
Specifications
12 VDC (±5%), 200 mA max.*
0 VDC (GND for power supply)
5 VDC (±5%), 200 mA max.*
Line driver input (RS422 level)
(maximum input frequency: 300 kHz)
–
Line driver output (RS422 level output)
–
–
2
33
2-