Omron VARISPEED F7 User Manual page 140

Digital Reference Card: F3
Name
Param-
eter
Num-
Display
ber
Sets the Digital Reference
Card input method.
0: BCD 1% unit
1: BCD 0.1% unit
Digital input
option 2: BCD 0.01% unit
3: BCD 1 Hz unit
4: BCD 0.1 Hz unit
5: BCD 0.01 Hz unit
F3-01 6: BCD special setting (5-
digit input)
7: Binary input
6 is effective only, when the
DI-16H2 is used.
DI Input
When o1-03 is set to 2 or
higher, the input will be BCD,
and the units will change to the
o1-03 setting.
Analog Output Option Card Setup: F4
Param-
eter Name
Number
Channel 1 This function is enabled when
F4-01 Monitor the analog monitor card is
Selection used.
Channel 1
F4-02
Monitor selection: Sets the
Gain
number of the monitor item to
Channel 2
be output. (Numerical portion
F4-03 Monitor
of U1-
Selection
4, 10, 11, 12, 13, 14, 25, 28,
35, 39 and 40 cannot be set.
Channel 2
F4-04
Gain
Gain: Sets the percentage of
the monitor item, which is
CH1 Output
F4-05
equal to 10V output.
Bias
Bias: Sets the percentage of
CH2 Output the monitor item, which is
F4-06
Bias equal to 0V output.
Analog Out- Selects the analog output sig-
F4-07 put Signal nal level for channel 1 (effec-
Level CH1 tive for the AO-12 option card
only).
0: 0 to 10V
1: -10 to +10
Analog Out-
F4-08 put Signal
Using an AO-08 option card
Level CH2
the possible outputs signal is 0
to +10V only. The setting of
F4-07 and F4-08 has no
effect.
Setting Factory
Description
Range Setting
0 to 7
Setting Factory
Description
Range Setting
1 to 38
0.0 to
100.0%
100.0
1 to 38
)
0.0 to
50.0%
100.0
–110.0
to 0.0%
110.0
–110.0
to 0.0%
110.0
0, 1
0, 1
Control Methods
Change
Open
during
V/f
Loop
Opera-
V/f with
Vector
tion
PG
0 No A A
Control Methods
Change
during
V/f Open
Opera-
V/f with Loop
tion
PG Vector
2 No A A
Yes A A
3 No A A
Yes A A
Yes A A
Yes A A
0 No A A
0 No A A
MEMO
BUS
Closed
Page
Regis-
Loop
ter
Vector
1
A A 390H 6-149
MEM
OBUS
Closed
Page
Regis-
Loop
ter
Vector
A A 391H -
A A 392H -
A A 393H -
A A 394H -
A A 395H -
A A 396H -
A A 397H -
A A 398H -
5
39
5-