Table of Contents
Advertisement
112 | HDZ Series 1080p IP PTZ User Manual
To restore all factory default settings, except the network settings:
1.
2.
To reboot the camera without changing the current settings:
1.
2.
Upgrading the Software
To upgrade the firmware:
1.
2.
www.honeywell.com/security
Figure 7-18
Resetting to Factory Default Screen
Navigate to System
Factory Default (see
Click Set Soft Default.
All changes except the network settings are lost and the system restarts after 100
seconds.
Navigate to System
Factory Default (see
Click Reboot.
The system restarts without changing the current settings.
Download the software upgrade file to your hard drive. Make a note of the file location.
Navigate to System
Software Upgrade (see
Figure
7-18).
Figure
7-18).
Figure
7-19).
Advertisement
Table of Contents
