Setting the Alarm Actions
You can specify what actions you want the camera to perform when the selected alarm is
triggered. You can select more than one action. See the following sections for more information.
To enable alarm relay output:
Under Triggered action (see
Enable alarm output 2 check boxes.
To send a message to an FTP/email server that you have configured:
Under Triggered action, select one or both of the following:
•
•
Figure 6-5
Alarm Input Parameters
Figure
The Send message by FTP check box to send the message to the FTP server (see
Settings on page 75
for information on setting up an FTP server).
The Send message by E-Mail check box to send the message to the mail server (see
Server Settings on page 75
6-5), select one or both of the Enable alarm output 1 and
for information on setting up an email server).
Configuring Alarms | 79
Server
800-11873V2 - A - 07/2013