Using Safety Cable During Installation; Figure 2-1 Eyelet On Camera To Secure By Lanyard During Setup - Honeywell HDZ20HD User Manual

Model No.
HDZINBKT
HDXCMA1
HDXPMA1
For additional information, see

Using Safety Cable During Installation

The HDZ Series 1080p IP PTZ camera includes an eyelet for attaching a safety cable to securely
fix the camera to the mounting structure (see
safety cable (such as a 3/32-in. [2.4 mm] plastic coated aircraft cable) to secure the camera to
the building structure. This will prevent the camera from falling during installation. The cable
must be strong enough to support the weight of the camera (indoor model: 4.9 lb. [2.2 kg],
outdoor model: 5.7 lb. [2.6 kg]).
Eyelet location on Indoor dome back panel
Table 2-2 Honeywell Mounts and Adapters (cont'd)
Description
In-Ceiling mounting bracket for the HDZ series.
Corner Mount Adapter for HDXWM2
Pole Mount Adapter for HDXWM2
Note An In-ceiling mounting bracket (HDZINBKT) is available. Check with your
Honeywell supplier regarding In-ceiling mounting. See
Bracket Installation, for in-ceiling bracket mounting instructions.
Figure 2-1 Eyelet on Camera to Secure by Lanyard During Setup
Related Documents on page
Figure 2-1). It is recommended that you install a
Eyelet location on Outdoor dome back panel
Installing the Camera | 21
Indoor Outdoor
X
X
X
Appendix B, In-Ceiling
16.
800-11873V2 - A - 07/2013
X
X