Table of Contents
Advertisement
70 | HDZ Series 1080p IP PTZ User Manual
Speed by Zoom
The speed by zoom function lets you view objects clearly while zooming in. As the camera
zooms in, the pan and tilt speed slow proportional to the amount of zoom, causing the scene to
remain in focus throughout zooming.
Enable this function to adjust the pan/tilt speed automatically by internal algorithm when
zooming. The larger zoom ratio leads to a lower rotating speed.
To enable/disable the speed by zoom function:
1.
2.
3.
ICR Function
The ICR (IR Cut Removable) function produces clear, accurate images at night or in low-light
conditions. During the day, the camera uses an IR cut filter to filter out infrared (IR) light to ensure
an undistorted color picture. At night, or in low light, the IR cut filter is removed, allowing the
camera to make use of IR light to deliver high-quality black-and-white images. You can select
one of the following ICR modes:
Mode
Auto (default)
On
Off
To set the ICR mode:
1.
www.honeywell.com/security
Note
Flip setting is manually controlled ONLY. If a preset position or point for another
function (such as mimic tour) is set in a position that can only be reached through
Flip motion, that position can not be reached when the Flip function is disabled.
Navigate to PTZ
Camera.
Under Misc (see
Figure
5-11), in the Speed by zoom drop-down list, select one of the
following:
•
On to enable the speed by zoom function.
•
Off (default) to disable the speed by zoom function.
Click Set to save the setting.
Table 5-4
ICR Modes
Description
The IR cut filter is removed automatically when the image brightness drops
below a certain level.
Removes the IR cut filter.
Leaves the IR cut filter in place.
Navigate to PTZ
Camera.
Advertisement
Table of Contents
