Table of Contents
Advertisement
82 | HDZ Series 1080p IP PTZ User Manual
2.
3.
4.
To send an HTTP notification to an HTTP server that you have configured:
1.
2.
3.
Setting a File Name
You can specify a file name format for images uploaded when the alarm is triggered. Choose
the format that best meets your requirements.
To specify a file name format:
1.
2.
Saving Alarm Input Settings
Click Save after you have configured the alarm input settings in the Alarm Application section
of the System tab. See
page
www.honeywell.com/security
Select the PTZ function to perform on this alarm from the drop-down list: Preset, Preset
Tour, Autopan, Mimic Tour. See
information on programming these PTZ functions.
Enter a value in the Function line field to identify the specific function to perform (for
example, in
Figure
6-9, Preset 2 is selected).
If applicable (only available if Preset is selected), enter a value in the Dwell time field.
Under Triggered action, select the Send HTTP notification check box. The Send HTTP
notification options will appear below the check box (see
Figure 6-10
Send HTTP Notification Options
In the HTTP address drop-down list, select either HTTP1 or HTTP2.
In the Custom parameters field, enter the parameters to send to the HTTP server when
the alarm is triggered.
For example, if the HTTP server name is http://192.168.0.1/admin.php and the custom
parameter is action=1&group=2, the notification will be sent to the HTTP server as
http://192.168.0.1/admin.php?action=1&group=2 when the alarm is triggered.
In the File Name field (see
Select one of the following options for the file name format:
•
Add date/time suffix to add the date and time in YYMMDD_HHMMSS format (for
example, image120428_034724.jpg).
•
Add sequence number suffix (no maximum value).
•
Add sequence number suffix up to [number] and then start over, and enter a
value in the number field.
•
Overwrite to overwrite an older file with a new file with a static filename.
Setting the Alarm Status and Type, page
79, and
Setting a File Name on page 82
Configuring PTZ Settings on page 53
6-5), type a file name (for example: image.jpg).
Figure
for more information.
for more
Figure
6-10).
78,
Setting the Alarm Actions,
Advertisement
Table of Contents
