Assigning A Static Ip Address To The Camera; Figure 3-1 Honeywell Device Search Application; Figure 3-2 Right-Click Menu On Device Search Application - Honeywell HDZ20HD User Manual

30 | HDZ Series 1080p IP PTZ User Manual
2.
3.
4.

Assigning a Static IP Address to the Camera

If required, you can assign a static (fixed) IP address to the camera. To assign a static IP
address:
1.
2.
Note The
IP Relay
function is
reserved.
3.
4.
www.honeywell.com/security
Double-click the Honeywell Device Search icon
computer.
Copy the Honeywell Device Search executable file to your computer desktop (or other
location) to run the Honeywell Device Search without using the installation disc.
Launch the Honeywell Device Search application and click Device Search to search for
cameras on the network.
All IP cameras discovered on the network are displayed (as shown in
Figure 3-1 Honeywell Device Search Application
Note The camera comes with the IP address set as DHCP/APIPA by default. It is not
required to switch to a static IP address. Users may choose to keep the default
DHCP/APIPA assigned IP address.
Launch the Honeywell Device Search application and click Device Search (see
Figure 3-1).
Right-click the camera that you want to assign a static IP address, and click Network
Setup. Make a note of the camera's MAC address for future reference (see
Figure 3-2 Right-Click Menu on Device Search Application
In the Network setup window (see
option.
Fill in the IP Address, Gateway, Netmask, and DNS fields, and then click Apply.
to run the application on your
Record the MAC address
for future reference
Figure 3-3), select the Static IP Network Property
Figure 3-1).
Figure 3-2).