Table of Contents
Advertisement
20 | HDZ Series 1080p IP PTZ User Manual
Accessories You Can Order Separately
There are a few accessories for your HDZ Series 1080p IP PTZ camera that can be ordered
separately (see
Assembling the Camera
Camera assembly is quick and easy. To assemble the camera:
1.
2.
3.
4.
5.
6.
7.
Mounting the Camera
You can install the camera to a ceiling, wall, pole, parapet, or roof using one of the following
Honeywell products:
Model No.
HDCM1
HDXWM2
HDPRM2
www.honeywell.com/security
Table
2-1).
Table 2-1
Orderable Accessories
Model Number
HDZVRSMKAC
Smoked PC vandal proof acrylic dome cover for the HDZ series.
HDZVRCLRAC
Clear PC vandal proof acrylic dome cover for the HDZ series.
Note
517082-7130
In-Ceiling PTZ support plate (for use with HDZINBKT in-ceiling mount).
Take the camera and all other components out of the packaging.
Rotate and remove the protective cover bag from the camera body.
Use the torx driver to take off the dome cover.
Remove the foam and tape from inside the dome.
Remove the lens cap from the camera lens.
Use the torx driver to re-attach the dome cover to the camera body.
Leave the protective film on the dome cover until installation is complete.
Table 2-2
Honeywell Mounts and Adapters
Description
Ceiling Mount
Wall Mount
Parapet/Flat Roof Mount
This part is for repair purposes only.
Indoor
Outdoor
X
X
X
X
X
Advertisement
Table of Contents
