Table of Contents
Advertisement
72 | HDZ Series 1080p IP PTZ User Manual
To enable/disable wide dynamic range:
1.
2.
3.
Auto Calibration
When the auto calibration function is enabled, the image is calibrated automatically whenever a
deviation in the camera pivot is detected.
To enable/disable auto calibration:
1.
2.
3.
2D Noise Reduction
2-dimensional noise reduction (2DNR) reduces image noise produced in low-light conditions.
2D noise reduction technology reduces noise by maintaining smooth edges on moving objects.
To enable/disable 2D noise reduction:
1.
2.
3.
On Screen Display
The on-screen display function (OSD) can be enabled to provide the user with directional
information for the focal point that the PTZ camera is facing. OSD information will include the
compass point that the camera is facing (North, South, East or West) and the zoom ratio that
the camera is currently using. The OSD will also provide the degrees that the camera is facing,
on both vertical and horizontal axes of rotation. See
the browser with the on-screen display showing the PTZ information on the video image.
www.honeywell.com/security
Navigate to PTZ
Camera.
Under Misc (see
Figure
5-12), in the WDR drop-down list, select one of the following:
•
On to enable wide dynamic range.
•
Off (default) to disable wide dynamic range.
Click Set to save the setting.
Navigate to PTZ
Camera.
Under Misc (see
Figure
5-12), in the Auto calibration drop-down list, select one of the
following:
•
On to enable auto calibration.
•
Off (default) to disable auto calibration.
Click Set to save the setting.
Navigate to PTZ
Camera.
Under Misc (see
Figure
5-12), in the 2DNR drop-down list, select one of the following:
•
On to enable noise reduction.
•
Off (default) to disable noise reduction.
Click Set to save the setting.
Figure 3-8
on
page 37
to see an example of
Advertisement
Table of Contents
