Table 7-2 Ports That Can Be Individually Configured; Configuring Ports - Honeywell HDZ20HD User Manual

Hdz series 1080p ip ptz dome camera
Hide thumbs Also See for HDZ20HD:
Table of Contents

Advertisement

102 | HDZ Series 1080p IP PTZ User Manual
Setting a Dynamically Assigned IP Address
The camera is assigned a dynamic (DHCP) IP address by default. Use the Honeywell Device
Search tool to find the automatically assigned dynamic IP address (refer to
on a Network on page 29
If a fixed IP address has been assigned (see
can set the camera to use a dynamically assigned (DHCP) IP address by selecting the Get IP
address automatically option and clicking Save (see
Enabling PPPoE
If you connect to the network using PPPoE (Point-to-Point Protocol over Ethernet), you can
enable PPPoE support. To enable PPPoE support:
1.
2.
3.

Configuring Ports

You can change the settings of the ports listed in
Port
Description
Web Server (HTTP)
The default setting of the web server port is 80. Make sure to notify users of any change to
this setting. For example, if you change the port of a camera whose IP address is
192.168.0.100 from 80 to 8080, users will need to type http://192.168.0.100:8080
into the address bar of their web browser for the connection to be successful.
RTSP
The default setting of the RTSP port is 554. The setting range is from 1024 to 65535.
MJPEG over HTTP
The default setting of the MJPEG over HTTP port is 8008. The setting range is from 1024 to
65535.
HTTPS
The default setting of the HTTPS port is 443. The setting range is from 1024 to 65535.
Note
To change a port setting:
1.
2.
www.honeywell.com/security
for more information).
Note
You can also assign a dynamic IP address to the PTZ camera by using the
Honeywell Device Search tool (see
Navigate to System
Network
Select the Use PPPoE option in the General section of the screen.
Enter your PPPoE User name and Password, and then click Save.
Table 7-2
Ports that Can be Individually Configured
This setting cannot be the same as the web server port.
Navigate to System
Network
Under Advanced, enter a new port value in the field corresponding to the port you want to
change, and then click Save.
Assigning a Fixed IP Address on page
Figure
7-8).
Figure 3-3
on
page
Basic (see
Figure
7-8).
Table
7-2.
Basic (see
Figure
7-8).
Finding the Camera
101), you
31).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdz20hdxHdz20hdexHdz20hde

Table of Contents